.png){kind=small}
.png){kind=small}
SCREWS
DIN 7981-C Pan head tapping screws with cross recess
DIN 7981 C
Standard : Current norm: DIN ISO 7049
Measurement : Metric
Material : Carbon Steel/Stainless Steel
Finish : Plain, Zinc Plated, Zinc Flake
DIN 7981C is a pan head self-tapping sheet metal screws These screws are designed to cut threads into pre-drilled untapped holes of the substrate into which they are screwed. The recommended pilot hole sizes vary. depending on the diameter of the screw to be used and thickness of the substrate material. DIN 7981C pan head self- tapping sheet metal screws are fully threaded with a coarse thread and a gimlet point (Form C). The pan head is cylindrical with a slightly rounded top surface and a flat bearing surface underneath. This head style is ideal for most applications where a protruding head is acceptable.
To get detailed information or to place an order, send us an e-mail.
.png){kind=small}
DIN 965 Phillips Flat Head Machine Screw
DIN 965
Standard : DIN EN ISO 7046
Measurement : Metric
Material : Carbon Steel/Stainless Steel
Finish : Plain, Zinc Plated, Zinc Flake
DIN 965 is a cross recessed (Phillips) flat countersunk machine screws. Metric machine screws are designed for metal to metal applications requiring a pre-drilled hole and a mating metric nut or the screw to thread into. These screws are usually fully threaded with machine threads and blunt point. The recommended pre-drilled hole sizes vary depending on the diameter of the screw to be used but should be slightly larger in diameter than the major (maximum) thread diameter. Metric Flat countersunk heads have a flat top surface and a cone-shaped bearing surface with a head angle of approximately 90°. They are used for applications where the head must be flush with the mating surface of the substrate.
To get detailed information or to place an order, send us an e-mail.
DIN 571 Hex wood screws
DIN 571
Standard : Current norm: DIN 571
Measurement : Metric
Material : Carbon Steel/Stainless Steel
Finish : Plain, Zinc Plated, Zinc Flake
The classic wood screw is manufactured in accordance with DIN 571 and is used in many wood constructions and enables strong wood connections. The hex-head allows a high torque transfer. The screw is especially well-suited for nylon plugs since the wood thread spreads the plugs optimally and thus high load bearing capacities are achieved.
To get detailed information or to place an order, send us an e-mail.
DIN 7982-C Cross recessed countersunk head tapping screws
DIN 7982 C
Standard : Current norm: DIN ISO 7050
Measurement : Metric
Material : Carbon Steel/Stainless Steel
Finish : Plain, Zinc Plated, Zinc Flake
DIN 7982C Cross Recessed Flat Countersunk Head Self-Tapping Sheet Metal Screws are designed to cut threads into pre-drilled untapped holes of the substrate into which they are screwed. The recommended pilot hole sizes vary. depending on the diameter of the screw to be used and thickness of the substrate material. DIN 7982C Cross Recessed Flat Countersunk Head SelfTapping Sheet Metal Screws are fully threaded with a coarse thread and a gimlet point (Form C). Recommended to be used in thin gauge sheet metal. resinous plywood. and composite materials. The flat head is ideal where the head is to sit flush with the substrate when fully engaged. The flat head has an 80 degree countersink. Available drives include phillips, pozidrive and 6-lobe Torx-style.
To get detailed information or to place an order, send us an e-mail.
DIN 7505 Slotted pan head screws
DIN 7505
Standard : DIN 85, DIN EN ISO 1580
Measurement : Metric
Material : Carbon Steel/Stainless Steel
Finish : Plain, Zinc Plated, Zinc Flake
DIN 7505 Chipboard screws from BiTork Fasteners are self-tapping screws with a small screw diameter. It can be used for precision applications like the fastening of chipboards of varying densities. They have coarse threads to ensure the perfect sitting of the screw on the chipboard surface. Most of the chipboard screws are self-tapping, which means that there is no need for a pilot hole to be pre-drilled. Despite having very high tensile strength, these screws are easy to use and prevent the surface from cracking or splitting even without the use of a washer. In addition to that, they are temperature resistant, which means that they can retain their mechanical and electrical characteristics even at very high or very low temperatures.
To get detailed information or to place an order, send us an e-mail.
DIN 84 Slotted cheese head screws
DIN 84
Standard : DIN84, DIN EN ISO 1207
Measurement : Metric
Material : Carbon Steel/Stainless Steel
Finish : Plain, Zinc Plated, Zinc Flake
DIN 84 is a slotted drive machine screw with a cheese head. Machine screws are externally threaded fasteners designed to be mated with threaded nuts or tapped holes in the parts they are designed to hold together. DIN 84 Slotted Cheese Head Machine Screws are fully threaded and can be used for many applications.
To get detailed information or to place an order, send us an e-mail.
DIN 7504 K Hex Head Drilling screws
DIN 7504 K
Standard : Current norm: ISO 15480
Measurement : Metric
Material : Carbon Steel/Stainless Steel
Finish : Plain, Zinc Plated, Zinc Flake
Self-drilling screw DIN 7504K hexagonal washer head, has a special drill point that allows drilling thickness sheets depending on the screw diameter from 2 mm ( screw diameter 3,5) up to 6 mm (screw diameter 6,3). It can be used on metal and aluminum surfaces.
To get detailed information or to place an order, send us an e-mail.
DIN 7504 N Self Drilling screws
DIN 7504 N
Standard : Current norm: ISO 15481
Measurement : Metric
Material : Carbon Steel/Stainless Steel
Finish : Plain, Zinc Plated, Zinc Flake
Self-drilling screw DIN 7504N pan head and PH recess drills thickness plates depending on the screw diameter, from 2 mm (Ø3,5) up to 6 mm (Ø6,3). Materials in steel and stainless steel A2 and coating blue zinc plated, black zinc plated and white lacquered.
To get detailed information or to place an order, send us an e-mail.
DIN 7504 P Self Drilling screws
DIN 7504 P
Standard : Current norm: ISO 15482
Measurement : Metric
Material : Carbon Steel/Stainless Steel
Finish : Plain, Zinc Plated, Zinc Flake
Self-drilling screw DIN 7504P countersunk head and PH recess drills thickness plates depending on the screw diameter, from 2 mm (Ø3,5) up to 6 mm (Ø6,3). It can be used on metal and aluminum surfaces.
To get detailed information or to place an order, send us an e-mail.
DIN 963 Slotted countersunk head screws
DIN 963
Standard : Current norm: DIN EN ISO 2009
Measurement : Metric
Material : Carbon Steel/Stainless Steel
Finish : Plain, Zinc Plated, Zinc Flake
DIN 963 are slotted drive flat countersunk head machine screws. Metric machine screws are designed for metal to metal applications requiring a pre-drilled hole and a mating metric nut for the screw to thread into. These screws are usually fully threaded with machine threads and blunt point. The recommended pre-drilled hole sizes vary depending on the diameter of the screw to be used but should be slightly larger in diameter than the major (maximum) thread diameter. Metric flat countersunk heads have a flat top surface and a cone-shaped bearing surface with a head angle of approximately 90°. They are used for applications where the head must be flush with the mating surface of the substrate.
To get detailed information or to place an order, send us an e-mail.
DIN 7971 Tapping screws, slotted pan head
DIN 7971
Standard : Current norm: DIN ISO 1481
Measurement : Metric
Material : Carbon Steel/Stainless Steel
Finish : Plain, Zinc Plated, Zinc Flake
DIN 7971 Pan Head Slot Drive Self Tapping Sheet Metal Screws are thread forming screws that tap their own threads in the substrate into which they are driven – usually thin metal. The slot drive accepts a single blade slot screwdriver ideal for simple manual applications. DIN 7971 Pan Head Slot Drive Self Tapping Sheet Metal Screws are to be used with pre-drilled, punched or nested pilot holes in sheet metal or other solid materials.
To get detailed information or to place an order, send us an e-mail.
DIN 7985 Cross recessed raised cheese head screws
DIN 7985
Standard : Current norm: DIN EN ISO 7045
Measurement : Metric
Material : Carbon Steel/Stainless Steel
Finish : Plain, Zinc Plated, Zinc Flake
DIN 7985 are cross recessed (Phillips) raised cheese head (Pan Head) machine screws. Machine screws are externally threaded fasteners designed to be mated with threaded nuts or tapped holes in the parts they are designed to hold together. DIN 7985 cross recessed (Phillips) raised cheese head (Pan Head) machine screws can be used for many applications. The pan head is cylindrical head with a slightly rounded top surface and a flat bearing surface underneath. This head style is ideal for most applications where a protruding head is acceptable.
To get detailed information or to place an order, send us an e-mail.
Drywall Screws (Fine Thread)
Measurement : Metric
Material : Carbon Steel/Stainless Steel
Finish : Plain, Zinc Plated, Zinc Flake
Drywall screws (sheetrock screws) are specialized self-tapping screws that usually feature a bugle head that is designed to attach drywall to studs, and a phosphate finish. In the construction industry, sheetrock screws have many alternative uses because they are relatively inexpensive, feature a flat head that is less prone to getting pulled through the wood, and thin, making these self tapping drywall screws less likely to split the wood. They are available with a coarse thread, fine thread, high-low pattern thread, and sometimes feature a trim head rather than a bugle head.
To get detailed information or to place an order, send us an e-mail.
Drywall Screws (Coarse Thread)
Measurement : Metric
Material : Carbon Steel/Stainless Steel
Finish : Plain, Zinc Plated, Zinc Flake
Drywall screws (sheetrock screws) are specialized self-tapping screws that usually feature a bugle head that is designed to attach drywall to studs, and a phosphate finish. In the construction industry, sheetrock screws have many alternative uses because they are relatively inexpensive, feature a flat head that is less prone to getting pulled through the wood, and thin, making these self tapping drywall screws less likely to split the wood. They are available with a coarse thread, fine thread, high-low pattern thread, and sometimes feature a trim head rather than a bugle head.
To get detailed information or to place an order, send us an e-mail.
Masonry screws / Concrete Screws
Measurement : Metric
Material : Carbon Steel/Stainless Steel
Finish : Plain, Zinc Plated, Zinc Flake
Masonry screws are a self-tapping screw that can be used in a variety of base materials that include: concrete, brick, mortar joints/block and CMU. They are manufactured out of stainless or carbon steel and come with or without a corrosion coating. Masonry screws are available in two different head styles, each designed for different applications. For applications where the head needs to be countersunk in the material, a flat countersunk Phillips head screw should be used.
To get detailed information or to place an order, send us an e-mail.
Buggle head self drilling screws
Measurement : Metric
Material : Carbon Steel/Stainless Steel
Finish : Plain, Zinc Plated, Zinc Flake
A bugle head self drilling screw is a form of self-drilling screw that’s specifically designed for drywall applications. Bugle head screws feature a countersunk head with a flat top and a concave under-head bearing surface. This unique design enables the distribution of the bearing stress over a much wider area than is possible with a flat head screw.
These screws are especially useful in applications where the screw must lie flush in the material and eliminate the need to predrill a countersinking hole.
To get detailed information or to place an order, send us an e-mail.
DIN 964 Slotted raised countersunk oval head screws
DIN 964
Standard : Current norm: DIN EN ISO 2010
Measurement : Metric
Material : Carbon Steel/Stainless Steel
Finish : Plain, Zinc Plated, Zinc Flake
DIN 964 is a slotted drive raised countersunk (oval) head machine screws. Metric machine screws are designed for metal to metal applications requiring a pre-drilled hole and a mating metric nut or the screw to thread into. These screws are usually fully threaded with machine threads and blunt point. The recommended pre-drilled hole sizes vary. depending on the diameter of the screw to be used but should be slightly larger in diameter than the major (maximum) thread diameter. Metric The raised countersunk (oval) heads are countersunk heads with a rounded domed top surface and a cone-shaped bearing surface having a head angle of approximately 80°. They are preferred over standard flat countersunk heads in applications when a more decorative finished look is desired.
To get detailed information or to place an order, send us an e-mail.
DIN 966 Cross recessed raised countersunk head screws
DIN 966
Standard : Current norm: DIN EN ISO 7047
Measurement : Metric
Material : Carbon Steel/Stainless Steel
Finish : Plain, Zinc Plated, Zinc Flake
To get detailed information or to place an order, send us an e-mail.
DIN 85 Slotted pan head screws
DIN 85
Standard : DIN 85, DIN EN ISO 1580
Measurement : Metric
Material : Carbon Steel/Stainless Steel
Finish : Plain, Zinc Plated, Zinc Flake
To get detailed information or to place an order, send us an e-mail.
DIN 85 is a slotted drive machine screw with a Pan head. Machine screws are externally threaded fasteners designed to be mated with threaded nuts or tapped holes in the parts they are designed to hold together. DIN 85 Slotted Pan Head Machine Screws are fully threaded and can be used for many applications.
DIN 95 Slotted oval head wood screws
DIN 95
Standard : DIN 95,CSN 021815; PN 82504
Measurement : Metric
Material : Carbon Steel/Stainless Steel
Finish : Plain, Zinc Plated, Zinc Flake
To get detailed information or to place an order, send us an e-mail.
DIN 96 Slotted Round Head Wood Screws
DIN 96
Standard : DIN 96
Measurement : Metric
Material : Carbon Steel/Stainless Steel
Finish : Plain, Zinc Plated, Zinc Flake
To get detailed information or to place an order, send us an e-mail.
DIN 464 Knurled thumb screws, high type
Standard : DIN 464
Measurement : Metric
Material : Carbon Steel/Stainless Steel
Finish : Plain, Zinc Plated, Zinc Flake
To get detailed information or to place an order, send us an e-mail.
DIN 464
DIN 558 Hexagonal screws, production class C
Standard : Current norm: DIN EN 24018
Measurement : Metric
Material : Carbon Steel/Stainless Steel
Finish : Plain, Zinc Plated, Zinc Flake
To get detailed information or to place an order, send us an e-mail.
DIN 558
DIN 920 Slotted Pan Head Screws
Standard : Current norm: DIN 920
Measurement : Metric
Material : Carbon Steel/Stainless Steel
Finish : Plain, Zinc Plated, Zinc Flake
To get detailed information or to place an order, send us an e-mail.
DIN 920
DIN 921 Slotted pan head screws with large head
Standard : Current norm: DIN 921
Measurement : Metric
Material : Carbon Steel/Stainless Steel
Finish : Plain, Zinc Plated, Zinc Flake
To get detailed information or to place an order, send us an e-mail.
DIN 921
DIN 927 Slotted Shoulder Screws
Standard : Current norm: DIN 927
Measurement : Metric
Material : Carbon Steel/Stainless Steel
Finish : Plain, Zinc Plated, Zinc Flake
To get detailed information or to place an order, send us an e-mail.
DIN 927
DIN 7965 Slotted inserts
Standard : Current norm: DIN 7965
Measurement : Metric
Material : Carbon Steel/Stainless Steel
Finish : Plain, Zinc Plated, Zinc Flake
To get detailed information or to place an order, send us an e-mail.
DIN 7965
DIN 7972 Slotted countersunk head tapping screws
Standard : Current norm: DIN ISO 1482
Measurement : Metric
Material : Carbon Steel/Stainless Steel
Finish : Plain, Zinc Plated, Zinc Flake
To get detailed information or to place an order, send us an e-mail.
DIN 7972
DIN 7973 Slotted raised countersunk head tapping screws
Standard : Current norm: DIN ISO 1483
Measurement : Metric
Material : Carbon Steel/Stainless Steel
Finish : Plain, Zinc Plated, Zinc Flake
To get detailed information or to place an order, send us an e-mail.
DIN 7973
DIN 7976 Hexagon head self tapping screws
Standard : Current norm: DIN ISO 1479
Measurement : Metric
Material : Carbon Steel/Stainless Steel
Finish : Plain, Zinc Plated, Zinc Flake
To get detailed information or to place an order, send us an e-mail.
DIN 7976
DIN 7983 C Countersunk Head Tapping Screws with Cross Recess
Standard : Current norm: DIN ISO 7051
Measurement : Metric
Material : Carbon Steel/Stainless Steel
Finish : Plain, Zinc Plated, Zinc Flake
To get detailed information or to place an order, send us an e-mail.
DIN 7983 C
DIN 7995 Cross recessed raised countersunk head wood screw
Standard : Current norm: DIN 7995
Measurement : Metric
Material : Carbon Steel/Stainless Steel
Finish : Plain, Zinc Plated, Zinc Flake
To get detailed information or to place an order, send us an e-mail.
DIN 7995
DIN 7997 Cross recessed countersunk head wood screws
Standard : Current norm: DIN 7997
Measurement : Metric
Material : Carbon Steel/Stainless Steel
Finish : Plain, Zinc Plated, Zinc Flake
To get detailed information or to place an order, send us an e-mail.
DIN 7997
Washer head self drilling screws
Measurement : Metric
Material : Carbon Steel/Stainless Steel
Finish : Plain, Zinc Plated, Zinc Flake
To get detailed information or to place an order, send us an e-mail.